一种大量元素水溶肥料的制备及其在玉米上的喷施效果

根据玉米需肥特性设计氮磷钾比例,制备了含中微量元素的大量元素水溶肥料,产品氮、磷、钾比例为2∶1∶4,属于高钾中氮低磷型.在河北省安平县前子文村和浙江省新昌县孟家塘村玉米上开展了叶面喷施试验.结果表明:玉米生物学性能得到改善,玉米产量、出籽率、百粒重与容重得到提高;与空白对照相比,平均增产率为5.45％,平均纯增收896.40元/公顷,平均产投比为5.43∶1.     

负极添加NMP对电池性能的影响

锂离子电池负极浆料中添加N-甲基吡咯烷酮(NMP),在极片加热干燥时不能完全除去.残留的NMP吸附在石墨表面,使得SEI膜与石墨结合不牢固.研究了其对电池性能的影响,结果显示,在电池的循环过程中,SEI膜逐渐脱落,导致电池循环寿命缩短,但对电池的容量、内阻、倍率、存储等初期性能不影响.     

5G时代下VR/AR在广电新媒体行业中的应用探究

近年来,随着国民经济的快速增长,人们的生活质量得到进一步提升,基于此,新媒体行业得到快速发展.对此,基于VR、AR技术特点,探析"5G+4K/8K+AR/VR"新技术在广电新媒体制播领域的实践应用.     

基于S32K144的燃料电池堆控制系统设计

基于汽车级微控制器S32K144芯片,完成了车用质子交换膜燃料电池堆控制系统的软硬件设计,分别设计了膜电极单模电压检测电路和燃料电池堆控制电路,开发了基于C语言的膜电极电压采集程序和燃料电池堆控制程序,并且用样机验证了设计.     

下扬子地区下志留统风暴沉积特征及风暴作用对泥页岩品质的影响

近年来在下扬子地区页岩气地质调查井所获取的地层岩心资料，揭示该地区下志留统风暴沉积较为发育。基于精细的岩心观察描述，详细分析了下扬子地区下志留统高家边组下段中上部风暴沉积的特征，并阐明了风暴作用对泥页岩的影响。研究表明：研究区风暴岩岩性偏细，以粉砂岩为主，石英含量较高，结构成熟度较低，具2种不同的粒度概率曲线；主要发育底部冲刷面、块状层理、平行层理、丘状交错层理、波纹交错层理、准同生变形构造等沉积构造；垂向上主要识别出4种风暴沉积序列，均具有从底到顶粒度变细的沉积特征，不同的沉积序列与风暴流能量的强弱有关。下扬子地区早志留世频繁的风暴活动与研究区的古地理背景和古气候条件具有内在联系。特大型风暴对浅海陆棚深水区的细粒泥质沉积物特征产生重要影响，包括降低有机质含量、减少单层厚度、破坏垂向连续性、改变原始沉积构造和侧向稳定性等，总体上降低了泥页岩的品质。因此，研究认为在页岩气的勘探和评价过程中应重视风暴因素对陆棚深水区原始泥质沉积物的影响。     

Characteristics of reaction and product microstructure during light calcination of magnesite in transport bed

A gas-heating laboratory transport bed was adopted to simulate the industrial transportbed reactor for flash calcination of magnesite, and a method based on TG analysis of a reacted sample was further developed to calculate the decomposition rate or conversion of its containing MgCO₃. The study investigated how the conversion and product reactivity as well as microstructure vary with reaction conditions including temperature, particle size and times of re-calcination for powder magnesite. Magnesite powder (<150 μm) calcination is a quick reaction that reaches 98% decomposition of its containing MgCO₃ in 1—2 s,corroborating the feasibility of magnesite flash-calcination in transport bed reactors. The coloration time given by the citric acid chromogenic method was 17—55 s and 294 s for the obtained products from transport and fixed beds, respectively. This proves the obviously higher activity and thus improved microstructure of the product from transport bed. During the calcination process, the MgO grain size of the product gradually increases, and the surface structure changes from loose and porous to dense and smooth. This structural change can be completed within a few seconds.